Citrix XenApp HDX 3D || using Intel Iris Pro (HP Moonshot M710P)

This video shows the user experience with Citrix XenApp 7.6 FP2 running on HP Moonshot catridge M710P.
The M710P catridge is featuring the new APU (CPU/GPU) Intel Iris Pro Graphics P6300

 

Specs

Source

 

Recent Comments

Jose Brenes

|

Your map of Australia is wrong. You have put the state of Victoria inside the West Australian state.

Tobias K

|

Note that on XenServer 7.1, installing VDA 7.13 also works to enable vGPUs running XenDesktop 7.11 even using the newer “NvFBCEnable.exe -enable -noreset” command. Tested with an M60 using various profiles.

Alex

|

So how come version 3.11 doesn’t work for application switching?

John

|

Hello, how to allow SR-IOV for the Intel P580 in a m710x? (unable to find any settings in BIOS)

I get the following error: Dismount-VmHostAssignableDevice : The operation failed.
The device cannot be assigned to a virtual machine as the firmware (BIOS or UEFI) on this host computer system indicates that the device must remain in
contact with the firmware running in the host. The device can only be used in the management operating system. You should contact your OEM to determ
ine if a firmware upgrade is available, or if the PCI Express device can be reconfigured to be independent of the host firmware.

Aza

|

Great article Thomas.

Can you tell more about the difference in user density between M510 and M710x?
Citrix published an article with a LoginVSI test related to the M510 9https://www.citrix.com/blogs/2016/06/30/we-choose-to-go-to-the-moon/), but I’m more interested in the M170x because of its Iris Pro P580.