Archive for January, 2016

Citrix XenServer (next release) Tech Preview 2

Written by Thomas Poppelgaard. Posted in Citrix, Intel, XenApp, XenDesktop, XenServer

Citrix have release Tech Preview 2 of Citrix XenServer (next release). Great news for customers, partners, cloud providers using Citrix XenServer. The XenServer team have improved again the Dom0 and made the hypervisor even faster, this will be interesting to see if XenServer will be faster than the competitor VMware vSphere. Intel GPU virtualisation is now part of the hypervisor and again Citrix is leading the GPU virtualisation space as nr 1 compared to Microsoft and VMware. If you have a server with Intel Iris Pro graphics on Broadwell and Haswell processors equipped with the C226 chipset you can now virtualise the GPU to a VDI/XenApp. Software thin provisioning for SAN is now available in this release so XenServer better can utilise storage and not consume lots of space with “block based” as previously releases, a lot of customers is going to love this feature + a lot of new awesome features…

Important information before testing this release.

Known Issues and Advisories in this Tech Preview 

 NVIDIA vGPU cannot be used in conjunction with this Tech Preview. GPU Pass Through is supported. So if you have NVIDIA GRID vGPU running in your environment and you upgrade with this technical preview, I advise you not to do this.

Why Citrix XenServer Tech Preview 2

As a core component of the Citrix portfolio of products, Citrix continually strive to ensure that XenServer remains the best possible platform for hosting Citrix solutions, and for fulfilling the needs of server virtualization and Cloud customers.

This Technical Preview 2 offers enhanced features and functionality for application, desktop and server virtualization use cases. In addition to improved support for large-scale Microsoft Active Directory infrastructures and enhancements to XenServer control domain responsiveness, the Tech Preview includes:

  • Improved heterogeneous pool support
  • Support for software-boot-from-iSCSI for Cisco UCS
  • Support for hardware-accelerated graphics processing
  • Enhanced block and file based storage features
  • Increased scalability

Terms of access and use

  • The Tech Preview 2 is only available to existing customers, and requires a Tech Preview license key. The license key is available from this page and needs to be installed on a Citrix License Server.
  • This preview is intended only for existing Citrix XenServer, XenApp or XenDesktop customers.
  • The previewed features and enhancements are being considered for inclusion in future versions of XenServer.  They have not yet been fully integrated or productized, and there may be debugging code in place.
  • This is not a fully featured release, is not intended for use in any environment other than test or development, and should not be used for production workloads. Citrix does not guarantee that any preview features or functionality described here or within the downloadable product will be made available in a future releases.

Providing feedback and reporting bugs

To help us produce the best quality product and improve future releases, please report any issues you encounter at https://tracker.citrix.com/projects/XSB/

Whats next in Tech Preview 2

Simplified Heterogeneous Pool Support 

Enables new hosts to be added to existing resource pools, irrespective of the underlying CPU type (as long as the CPU is from the same vendor family).

VMs can now freely migrate within and across pools, irrespective of the particular CPU features the VM may be using.

These enhanced agilities are delivered without recourse to any command line expressions and do not require any hosts to be rebooted. Page 2 Copyright © 2016 Citrix Systems, Inc. All rights reserved. Citrix XenServer Tech Preview TP2: Release Notes v2.0 January 2016

Software-boot-from-iSCSI for Cisco UCS 

 Enables XenServer to boot from SAN via iSCSI, complimenting existing FC boot capabilities.

 XenServer can be installed to, booted from, and run from a LUN provided by an iSCSI target, which is specified in the iSCSI Boot Firmware Table (iBFT).

 Helps reduce infrastructure costs by removing the need for expensive Fibre Channel HBAs.

To use this feature, see Enabling Software-boot-from-iSCSI later in this document.

Intel GVT-g virtual GPU for Windows 

We continue to collaborate with our partners, in driving innovation in the virtualized-graphics domain. Within this Tech Preview, we showcase Intel’s virtual GPU; a graphics acceleration solution that requires no additional hardware:

 Uses the Intel Iris Pro functionality on Broadwell and Haswell processors equipped with the C226 chipset

 Utilizes a standard Intel GPU driver, installed within the VM

 Experience the benefit; simply RDP into a Windows 10 or a Windows 8.1 VM and run a graphically demanding application

Software Thin Provisioning for SAN 

With thin provisioning, a small amount of space is allocated initially to VDIs, which grows on demand, leading to far more efficient utilization of storage space. This will enable a significant reduction in the cost of ownership for the storage component of a SAN-based (LVMoiSCSI and LVMoHBA) XenServer environment.

This contrasts with previous versions of XenServer which only supported fully provisioned storage for block storage.

Support for SMB Storage 

XenServer is now able to use SMB1 storage as an SR type.

1 SMB is sometimes referred to as CIFS.

2 Press F10 when the installer boots to enable boot-from-SAN and to configure Open-FCoE settings.

Customers with existing SMB storage (ubiquitous in many Microsoft environments) can now utilize SMB as their XenServer SR, and therefore may need no additional storage for their XenServer environment, enabling significant potential cost savings.

Support for Offline Storage Migration 

Enables storage migrations to be undertaken with the VM in a stopped or suspended state. Currently customers are only able to migrate the storage of a VM, if the VM is actually running.

Support for NFSv4 

Adds support for the current version of the NFS standard and complements the existing NFSv3 support, delivering additional performance improvements.

Support for Open-FCoE 

Supports software FCoE, which can be configured easily using the XenServer installation program. Software-based FCoE delivers the same benefits as hardware-based FCoE. It alleviates the need for using expensive HBAs, but does so using less-expensive network adapters, in an entirely software-defined manner.

This Tech Preview also supports boot-from-SAN from Open-FCoE and includes an updated installer2 to assist with the configuration of Open-FCoE.

Improved Performance & Scale 

We continue to deliver ever greater performance and scale, enabling customers to realize economies of scale and processing efficiencies.

Increased Host Memory 

Support for up to 5 TB of system memory, accommodating even the largest workloads.

Support for up to 1.5 TB of Memory per VM 

For memory-hungry VMs3, such as those running databases, we now support up to 1.5 TB of memory.

Improved Dom0 Responsiveness 

The responsiveness of Dom0 has been significantly improved when subjected to heavy VM load.

Support for 256 CPUs 

Support for up to 256 physical CPUs, accommodating even the most powerful servers.

Increased number of VBDs 

Maximum number of VBDs per VM has increased to 255

Increased number of VBDs 

Maximum number of VBDs per host has increased to 4096

Enhanced Active Directory Support 

Delivering improvements for customers with large numbers of objects within their Active Directory, including improved login times.

Increased Size of Dom0 Disk Partitions 

By moving log files to a larger, separate partition, we enable more detailed logs to be held, over a longer period of time, improving the ability to diagnose issues. Simultaneously, this alleviates demands on Dom0’s root disk, which can sometimes lead to out of space issues, due to log file disk space consumption.

Single-threaded Storage IO 

Customers should notice significant improvements when using high performance/low latency storage.

Networking and Storage IO 

Higher throughput for Networking and Storage IO in aggregate usage scenarios.

Support for New Guests 

Introduction of the following new guests:

 SLED 11.3

 SLED 12

 Debian Jessie 8.0

Platform Improvements 

This Tech Preview also incorporates the following platform improvements:

 Latest Xen hypervisor v4.6

 Dom0 now uses Centos v7.1 for user space

 Support for booting hosts using UEFI, anticipating the eventual retirement of BIOS configured servers

XenCenter Improvements 

Customers are now able to initiate SSH console sessions direct from XenCenter.

Citrix Health Check 

Customers are now able to automate the process of uploading Server Status Reports to Citrix Insight Services and receive notifications in XenCenter, regarding the health of their systems, based on CIS-generated reports.

Source

Download Tech Preview 2 here

Poppelgaard Professional Services :

Citrix technology professional – CTP, and Microsoft Most Valuable Professional MVP, Thomas Poppelgaard provides professional services. Write to me on my email thomas@poppelgaard.com or call on my cell +45 53540356

thomas poppelgaard CTP & MVP

Recent Comments

Server 2016 Migration

|

Hello I wish to to share a comment here concerning you to definitely be able to inform you just how much i personally Loved this particular study. I have to elope in order to aTurkey Day time Supper but desired to leave ya an easy comment. We preserved you Same goes with be returning subsequent function to read more of yer quality articles. Keep up the quality work.

Server 2016 Migration

MarilynToush

|

This message is posted here using XRumer + XEvil 3.0
XEvil 3.0 is a revolutionary application that can bypass almost any anti-botnet protection.
Captcha Recognition Google, Facebook, Yandex, VKontakte, Captcha Com and over 8.4 million other types!
You read this – it means it works! 😉
Details on the official website of XEvil.Net, there is a free demo version.

Server 2016 Support

|

Wonderful website. A lot of useful info here. I am sending it to a few friends ans also sharing in delicious. And obviously, thanks for your sweat!

Server 2016 Support

Thomas Poppelgaard

|

Thanks Jose, I have corrected the map plus updated the map so 29 datacenters are now alive.

Jose Brenes

|

Your map of Australia is wrong. You have put the state of Victoria inside the West Australian state.