GPU

Hi all

I have created this page for giving you an overview which GPU vendors are in the available and supporting Virtualization.

Comments (3)

  • Rob

    |

    Hi, I wondered if you have had any issues installing VIM in VMware ESX 6. We cannot get the correct package to install on ESX. Do you have any good points of reference to get the correct software? Or any VIM troubleshooting tips?

    Many thanks
    Rob
    We are getting this error:
    VIM installation error – Suspect TESLA m3 card software is not the right version for ESX6 may have to call NVidia for advice.

    root@N4CD-ESXi-HOST-VDI-01:~] esxcli software vib install -v /NVIDIA_bootbank_N
    VIDIA-vGPU-kepler-VMware_ESXi_6.0_Host_Driver_361.45.09-1OEM.600.0.0.2494585.vib
    Installation Result
    Message: Host is not changed.
    Reboot Required: false
    VIBs Installed:
    VIBs Removed:
    VIBs Skipped: NVIDIA_bootbank_NVIDIA-vGPU-kepler-VMware_ESXi_6.0_Host_Driver_361.45.09-1OEM.600.0.0.2494585

    Reply

Leave a comment

Turn on pictures to see the captcha *

Recent Comments

Thomas Poppelgaard

|

Thanks Jose, I have corrected the map plus updated the map so 29 datacenters are now alive.

Jose Brenes

|

Your map of Australia is wrong. You have put the state of Victoria inside the West Australian state.

Tobias K

|

Note that on XenServer 7.1, installing VDA 7.13 also works to enable vGPUs running XenDesktop 7.11 even using the newer “NvFBCEnable.exe -enable -noreset” command. Tested with an M60 using various profiles.

Alex

|

So how come version 3.11 doesn’t work for application switching?

John

|

Hello, how to allow SR-IOV for the Intel P580 in a m710x? (unable to find any settings in BIOS)

I get the following error: Dismount-VmHostAssignableDevice : The operation failed.
The device cannot be assigned to a virtual machine as the firmware (BIOS or UEFI) on this host computer system indicates that the device must remain in
contact with the firmware running in the host. The device can only be used in the management operating system. You should contact your OEM to determ
ine if a firmware upgrade is available, or if the PCI Express device can be reconfigured to be independent of the host firmware.