Skip to main content

Citrix Branch Repeater 6.1.2 (15)

Citrix have released a new version of Citrix Branch Repeater 6.1.2 (15)

Issues Resolved in Release 6.1.2

  • Issue ID 0273591: When a connection is migrated from one acceleration pair to another in a 4-port HSRP configuration, the connection resets.
  • Issue ID 0309316: CIFS module generates excessive logs, making it difficult to extract valuable log messages from the log file.
  • Issue ID 0313683: Accessing the Branch Repeater configuration utility’s Configuration Network Adapters > Ethernet tab > apA.2/apA.1 Links page on a highly loaded Branch Repeater might cause the appliance to restart.
  • Issue ID 0319151: The Show Tech Support feature hangs when you select the Reports option.
  • Issue ID 0325668: Memory corruption in MAPI module causes the Branch Repeater to restart.
  • Issue ID 0327412: WCCP service group priority field is not propagated to the highavailability secondary appliance.
  • Issue ID 0327708: When you upgrade the Branch Repeater software from 5.x to a higher version, it becomes unresponsive because of an invalid application ID.
  • Issue ID 0330699: Direction flag in service class rules is interpreted differently by the acceleration engine and the QOS engine, because of inconsistent result reports.
    Filtering is done per flow in the acceleration engine and per packet in the QOS engine.
  • Issue IDs 0331203, 0332364, 0333377,0333813, 0335352, 0335690, 0336352, 0336365, 0336931 and 0337371: When running ICA traffic in the Branch Repeater, a memory leak might cause the appliance to run out of memory and become unresponsive.
  • Issue ID 0331439: Printing on remote servers causes the appliance to restart.
  • Issue ID 0332261: MAPI connections go to the inactive state even when connections are active and processing pending requests, causing the appliance to restart.
  • Issue ID 0334234: The high-availability secondary appliance becomes unresponsive because of insufficient memory due to frequent parameter synchronization from the high availability primary appliance.
  • Issue ID 0335362: The CLI is not properly assigning values based on the userspecified “classification type” for adding an application. The problem is sometimes seen when Command Center is used to restore or deploy any user-created applications, because Command Center relies upon the CLI to ‘add’ these applications, and consequently even good entries made previously via the GUI can become corrupted.


Download Citrix Branch Repeater 6.1.2 appliance for Hyper-V, VmWare vSphere, XenServer here
(Require MyCitrix ID)

Download Citrix Branch Repeater 6.1.2 Appliance Software here
(Require MyCitrix ID)

Download Citrix Plug-in 6.1.2 here
(Require MyCitrix ID)

Leave a Reply

Your email address will not be published. Required fields are marked *

Turn on pictures to see the captcha *